日本財団 図書館

共通ヘッダを読みとばす


Top > 技術 > 海洋工学.船舶工学.兵器 > 成果物情報

ISO/TC8/SC1/WG3 ストックホルム会議報告書

 事業名 船舶関係国際標準化活動
 団体名 日本船舶標準協会 注目度注目度5


Part 2 - Ships and marine technology − Catalogue of shipboard safety signs and notices for guidelines for use
1 Scope
This International Standard gives standardized safety signs and safety notices to be used on board ships. Each safety sign is categorized and indexed according to the safety message that is to be conveyed. Each shipboard safety sign is provided with relevant information on the preferred format of us, the context in which it is used and displayed as well as a description of the intended audience. This catalogue is intended to be under continual revision as new shipboard safety signs and notices are added as and when new requirements are identified and corresponding safety signs and notices are developed and standardised.
 
2 Normative references
The following normative documents contain provisions, which through reference in this text constitute provisions of this International Standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards.
 
IMO MSC/Circ. 699 − Revised guidelines for passengers safe instructions
 
IMO Resolution A.760(18) − Symbols related to life-saving appliances and arrangements
 
ISO/TR 14564: 1995 − Shipbuilding and marine structures − Marking of escape routes
 
ISO 15370:2001 − Ships and marine technology − Low location lighting on passenger ships - Arrangement
 
ISO 17631:2001 − Ships and marine technology − Shipboard plans for fire protection, life-saving appliances and means of escape − Arrangement
 
ISO 3864-1:2001 − Safety colours and safety signs − Part 1: Safety signs in workplaces and public areas − Design principles
 
ISO 3864-2:2001 − Safety colours and safety signs − Overview of standardized safety signs
 
ISO 7001:1990/amd.1:1993 − Public information symbols
 
[ISO 6039:xxxx − xxxx
 
ISO 16069:xxxx − xxxx
 
ISO 4196:xxxx − xxxx]
 
ISO 9186:2000 − Procedures for the development and testing of graphical symbols
 
International Convention for the Safety of Life at Sea, 1974 (SOLAS 1974), as amended in 1996.
 
3 Terms and definitions
For the purposes of this International Standard, the following terms and definitions apply.
 
4 Index of shipboard safety signs
4.1 Index by safety meaning
This index is in alphabetical order of the referent and provides the safety sign reference number (see table ?)
 
4.2 Index by type reference number
This index is in numerical order within the different categories of safety signs according to their function (see table ?)
 
4.3 SEM index
is the category for escape route identification - means of escape safety signs
 
4.4 SEE index
is the category for location of first aid facilities and portable safety equipment - emergency equipment safety signs
 
4.5 SLS index
is the category for location of life saving equipment - life saving appliance safety signs
 
4.6 SFE index
is the category for location of fire fighting equipment - fire fighting equipment safety signs
 
4.7 SSP index
is the category for prohibitive actions - prohibition safety signs
 
4.8 SSW index
is the category for identification of hazards and warning notices - warning safety signs
 
4.9 SSM index
is the category for mandatory notices and instructions - mandatory safety signs
 
4.10 SFCN index
is the category for fire control notices (symbols) & trained personnel instructions - fire and emergency control notice safety signs
 
4.11 SSN index
is the category for mimic signs and safety instructions & general safety notices - safety provisions, plans and instruction signs
 
Table ?
Index by safety meaning number Index by safety meaning number
1     30    
2     31    
3     32    
4     33    
5     34    
6     35    
7     36    
8     37    
9     38    
10     39    
11     40    
12     41    
13     42    
14     43    
15     44    
16     45    
17     46    
18     47    
19     48    
20     49    
21     50    
22     51    
23     52    
24     53    
25     54    
26     55    
27     56    
28     57    
29     58    
 
Index by safety meaning Number Index by safety meaning Number
59     88    
60     89    
61     90    
62     91    
63     92    
64     93    
65     94    
66     95    
67     96    
68     97    
69     98    
70     99    
71     100    
72     101    
73     102    
74     103    
75     104    
76     105    
77     106    
78     107    
79     108    
80     109    
81     110    
82     111    
83     112    
84     113    
85     114    
86     115    
87     116    







サイトに関するご意見・ご質問・お問合せ   サイトマップ   個人情報保護

日本財団会長笹川陽平ブログはこちら



ランキング
注目度とは?
成果物アクセスランキング
1,111位
(31,571成果物中)

成果物アクセス数
8,655

集計期間:成果物公開〜現在
更新日: 2019年12月7日

関連する他の成果物

1.ISO/TC67/SC7/WG5 ヒューストン会議報告書
2.ISO/TC108/SC2及び同WG2 ミンデン会議報告書
3.ISO/TC8/SC1及び同WG 東京会議報告書
4.救命胴衣及び浮力補助具に関するCEN/TC162/WG6及びISO/TC188/WG14 第11回ケルン合同会議報告書
5.ISO/TC8/AG カディス会議報告書
6.ISO/TC8/SC2及びWG3 オスロ会議報告書
7.ISO/TC8/SC6及び同WG8 釜山会議報告書
8.第18回ISO/TC18 スモールクラフト専門委員会及び同時開催作業委員会 ビクトリア会議報告書
9.ISO/TC8/SC1/WG1 コペンハーゲン会議報告書
10.ISO/TC8/SC2/WG3/ ロンドン会議報告書
11.第21回 ISO/TC8 本会議(釜山会議)報告書
12.第35回 ISO/TC8/AG 釜山会議報告書
13.第1回 ISO/TC8/SC8 釜山会議報告書
14.ISO/TC8/SC6 釜山会議報告書
15.第3回 ISO/TC8/SC4 釜山会議報告書
16.釜山会議セミナー
17.回頭角速度計/国際規格草案の作成
18.ラダーアングルインジケータ/国際規格草案の作成
19.ISOのA級及びB級磁気コンパスの統合規格/国際規格草案の作成
20.プロペラ軸回転計/国際規格草案の作成
21.プロペラピッチインジケータ/国際規格草案の作成
22.ISO9943:1991 造船―調理室及び調理器具のある配膳室の空調及び通風/国際規格草案の作成
23.ビジネスプラン
  [ 同じカテゴリの成果物 ]


アンケートにご協力
御願いします

この成果物は
お役に立ちましたか?


とても役に立った
まあまあ
普通
いまいち
全く役に立たなかった


この成果物をどのような
目的でご覧になりましたか?


レポート等の作成の
参考資料として
研究の一助として
関係者として参照した
興味があったので
間違って辿り着いただけ


ご意見・ご感想

ここで入力されたご質問・資料請求には、ご回答できません。






その他・お問い合わせ
ご質問は こちら から